Car, PEUGEOT, PARTNER, CAN, 9HX - EDC16C3
9HX - EDC16C3 - 0
Identification
PSA reference: 96 53 95 89 80
ECU manufacturer: Bosch
Additional number: 96 64 35 69 80
Software version: 04 00
Software reference: 66 48 26
VIN no: VF37F9HXCAJ855792
Engine type: 9HX
Model: Partner B9
DTC
P2144: Exhaust gas recirculation (EGR) valve - circuit malfunction
Controls
Clear DTC
Data stream
Additional heater: Cut-off
Inlet air temperature at manifold: 15.8 °C
Learn status: Incorrect; First EGR vlve programming correct; Last EGR butterfly programming correct; First EGR butterfly programming correct; Incorrect; Incorrect; ;
Barometric pressure sensor: 0.976 bar
Turbocharging pressure measured: 0.988 bar
Brake pedal switch 1: Released
Brake pedal switch 2: Released
A/C authorisation: No
Vehicle speed sensor: 0 km/h
Clutch pedal: Released
Gear engaged: Neutral
Fuel temperature sensor: 44.7 °C
A/C pressure sensor: 1.0 bar
Configuration: Correct
Engine coolant temperature sensor: 62.6 °C
Cooling fan relay: Inactive
Cooling fan speed: 0.0 %
Cooling fan reference speed: 0.0 %
Battery voltage: 12.45 V
EGR valve position repeat: 0.0 %
Camshaft and crankshaft synchronization: No
Fuel flow regulator: 13.7 %
Diesel output delivered by the pump reference value: 7741.2 mm³/s
Engine status: Ignition on
EGR valve open cycle ratio: 0.0 %
Pre-post heating relay: Inactive
A/C cut-off request: Cut-off
Engine speed: 803.1 rpm
Fuel pressure measured: 345.1 bar
Accelerator pedal position sensor: 0.0 %
Injected fuel quantity: 4.7 mg/impulse
Mass air flow sensor: 235.3 mg/impulse
Pre-injection advance 1: 19.1 °
Fuel injection advance (main): 0.7 °
Injector control error status: No fault
Turbocharging pressure reference value: 1.012 bar
Reference fuel pressure: 337.3 bar
Turbo pressure duty cycle: 64.3 %
Bypass throttle solenoid valve open cycle ratio: 0.0 %
EGR throttle electrovalve open cycle ratio: 70.2 %
Intake air temperature sensor: 32 °C
Air flow reference for EGR: 231.5 mg/impulse
Bypass flap position repeat (if present): 0.0 %
DPF information
Additive adding system fault:
Air flow volume: 686.3 kg/h
Catalytic converter downstream temperature: 349.4 °C
Exhaust gas differential pressure: 117.6 mbar
Intake air temperature sensor: 32 °C
Diesel Particulate filter (DPF) load state: 0.0 %
Average distance between the last 5 regenerations: 0.0 km
Diesel Particulate filter (DPF) distance since last regeneration: 0.0 km
Weight of additive in the PEF: 0.0 g
Volume of additive remaining in the reservoir: 3000.0 ml
Immobilizer
Locking of the ECU: Unlocked
Immobilizer status: Matched ECU
Problem detected when transmitting the unlock code: No problem
Actuators test
Controls
Cooling fan high speed
Cooling fan low speed
Additional heating relay
EGR valve
EGR throttle
Turbocharger control solenoid valve
Fuel flow regulator
Pre-post heating relay control
Additive pump
Utility
Controls
Diesel particulate filter replacement
EGR valve change
EGR exchanger replacement
Programming of the additive system if replacing parts (additive reservoir, pump or pipes)
Injectors replacement