Car, HAIMA, HAIMA 3, PUNCH VT2 (TCU)
Transaxle - PUNCH VT2 (TCU) - 0
Identification
Flashing device ID: 123456789A
Flash date: 42434445
Calibration version: FGHIQRSUTVWXYabc
DTC
Controls
Clear DTC
Data stream
Engine speed: 0.0 rpm
TCU vehicle speed: 0 km/h
Throttle position sensor (CAN): 0.0 %
Primary pulley speed: 0.0 rpm
Output speed: 0.0 rpm
Clutch slip: -512.0 rpm
PWM duty cycle for EDS1: 0.0 %
PWM duty cycle for EDS2: 0.0 %
PWM duty cycle for EDS3: 0.0 %
Oil temperature: -40 °C
Gear transmission ratio: 0.000
Lever position: Unknown
Number of DTC: 0
Engine torque (from CAN): -150.0 N·m
Indication of validity of adaption values: 0
Key off temperature of the reverse clutch of the last driving cycle: -40 °C
Key off temperature of the forward clutch of the last driving cycle: -40 °C
Adapted current reverse clutch (value 1): 0.0 mA
Adapted current reverse clutch (value 2): 0.0 mA
Adapted current reverse clutch (value 3): 0.0 mA
Adapted current reverse clutch (value 4): 0.0 mA
Adapted current reverse clutch (value 5): 0.0 mA
Adapted current reverse clutch (value 6): 0.0 mA
Adapted current reverse clutch (value 7): 0.0 mA
Adapted current reverse clutch (value 8): 0.0 mA
Adapted current reverse clutch (value 9): 0.0 mA
Adapted current forward clutch (value 1): 0.0 mA
Adapted current forward clutch (value 2): 0.0 mA
Adapted current forward clutch (value 3): 0.0 mA
Adapted current forward clutch (value 4): 0.0 mA
Adapted current forward clutch (value 5): 0.0 mA
Adapted current forward clutch (value 6): 0.0 mA
Adapted current forward clutch (value 7): 0.0 mA
Adapted current forward clutch (value 8): 0.0 mA
Adapted current forward clutch (value 9): 0.0 mA
Cumulative training value reverse clutch (value 1): 0.0
Cumulative training value reverse clutch (value 2): 0.0
Cumulative training value reverse clutch (value 3): 0.0
Cumulative training value reverse clutch (value 4): 0.0
Cumulative training value reverse clutch (value 5): 0.0
Cumulative training value reverse clutch (value 6): 0.0
Cumulative training value reverse clutch (value 7): 0.0
Cumulative training value reverse clutch (value 8): 0.0
Cumulative training value reverse clutch (value 9): 0.0
Cumulative training value forward clutch (value 1): 0.0
Cumulative training value forward clutch (value 2): 0.0
Cumulative training value forward clutch (value 3): 0.0
Cumulative training value forward clutch (value 4): 0.0
Cumulative training value forward clutch (value 5): 0.0
Cumulative training value forward clutch (value 6): 0.0
Cumulative training value forward clutch (value 7): 0.0
Cumulative training value forward clutch (value 8): 0.0
Cumulative training value forward clutch (value 9): 0.0
Correction factor on the relation between vehicle speed and secondary speed, to compensate for wheel radius inaccuracy: 0.000
Correction factor on the raw ABS sensor signal for the driven left wheel: 0.000
Correction factor on the raw ABS sensor signal for the non-driven left wheel: 0.000
Correction factor on the raw ABS sensor signal for the non-driven right wheel: 0.000
Spike counter for primary speed sensor (FC46): 0
Spike counter for secondary speed sensor (FC47): 0
Status of FC96 in the last driving cycle: 0
Temperature points for reverse clutch adaption (value 1): -40 °C
Temperature points for reverse clutch adaption (value 2): -40 °C
Temperature points for reverse clutch adaption (value 3): -40 °C
Temperature points for reverse clutch adaption (value 4): -40 °C
Temperature points for reverse clutch adaption (value 5): -40 °C
Temperature points for reverse clutch adaption (value 6): -40 °C
Temperature points for reverse clutch adaption (value 7): -40 °C
Temperature points for reverse clutch adaption (value 8): -40 °C
Temperature points for reverse clutch adaption (value 9): -40 °C
Temperature points for forward clutch adaption (value 1): -40 °C
Temperature points for forward clutch adaption (value 2): -40 °C
Temperature points for forward clutch adaption (value 3): -40 °C
Temperature points for forward clutch adaption (value 4): -40 °C
Temperature points for forward clutch adaption (value 5): -40 °C
Temperature points for forward clutch adaption (value 6): -40 °C
Temperature points for forward clutch adaption (value 7): -40 °C
Temperature points for forward clutch adaption (value 8): -40 °C
Temperature points for forward clutch adaption (value 9): -40 °C
Brake fault status:
Engine coolant temperature (CAN bus): -48 °C
ABS fail signal:
Missing the CAN message from the ABS: No
Missing the CAN message from the HCU: 0
Missing the CAN message from the MCU: 0
Missing the CAN message from the TCU: 0
Active fault reaction (1/2): 0
Active fault reaction (2/2): 0
Pressure regulator commanded current of pulley 1: 0.0 mA
Pressure regulator commanded current of pulley 2: 0.0 mA
Commanded current pressure regulator clutch: 0.0 mA
Target ratio: 0.000
Ratio gradient: 0.000 1/s
Calculated engine torque by transmission control unit (TCU): -150.0 N·m
Secondary pulley speed: 0.0 rpm
Actual current pressure regulator Pulley1: 0.0 mA
Actual current pressure regulator Pulley2: 0.0 mA
Pressure regulator actual current of clutch: 0.0 mA
Commanded clutch pressure: 0.0 bar
Commanded pulley 2 pressure: 0.0 bar
Measured pressure pulley 2: 0.0 bar
ZF reset counter: 0 km/h
SV reset counter: 0
TRAP reset counter: 0
TSK reset counter: 0
High side voltage: 0.00 V
Ignition voltage: 0.00 V
Supply voltage for sensors (5V): 0.00 V
Supply voltage for sensors (8.4V): 0.00 V
Mileage: 0 km
Battery voltage: 0.000 V
Clutch status:
Utility
Controls
Reset TCM learned