Bil, CHERY, TIGGO 8 (T18, T1A), Continuously variable transmission (CVT)
transakse - Continuously variable transmission (CVT) - 0
Identifikation
Material number: E08
Værksteds kode: 01KW
Application software number: CVT01991900
System calibration number: T21AAA
Hardware number: A2-C741-6180-0-00
Hardware version nummer: A2-C741-6180-0-00
Softwareversion: CVT01991900
Fejlkoder
P2798: Auxiliary transmission fluid pump control - circuit low voltage
P0811: Excessive clutch slippage
Controls
Clear DTC
TCU configuration
Transmission range engaged: Parkering
Torque requested by driver: 0.00 %
Batteri spænding: 12.25 V
Primary sensor data
Main relay status: 0
Oil temperature sensor: 0
Pressure sensor output: 0
Pressure sensor: 0
A/T turbine speed: 0
A/T input speed: 3584
A/T output speed: 0
TCU input check
Transmission range engaged: Parkering
Oil pressure 1: 0.0 bar
Oil temperature: -1.0 °C
Oil pressure 2: 0.1 bar
Torque requested by driver: 0.0 %
Signal for motordrejningsmoment: -25.0 %
Motor kølevæske temperatur føler: 3.0 °C
TCU output check
Clutch duty ratio: 0.0 %
Torque converter clutch duty ratio: 0.0 %
Primary belt wheel duty ratio: 0.0 %
Secondary belt wheel duty ratio: 0.0 %
Transmission mode: Normal modus
Transmission malfunction: Not default
Transmission range engaged: Parkering
Coolant temperature signal: 3.0 °C
Oil temperature: -1.0 °C
Dynamic check
Gearskifteposition: P
Motor Hastighed: 0.0 Omdr.
A/T turbine speed: 0 Omdr.
Køretøjets hastighed sensor: 0.0 km/h
Secondary pressure sensor: 0.0 bar
Torque requested by driver: 0.0 N·m
Primary pressure sensor: 0.0 bar
Oil temperature: -1.0 °C
Motor kølevæske temperatur føler: 3.0 °C
Speed check
Torque requested by driver: 0.0 %
Motor Hastighed: 0.0 Omdr.
A/T turbine speed: 0 Omdr.
Køretøjets hastighed sensor: 0.0 km/h
Primary speed sensor: 0 Omdr.
Secondary speed sensor: 0 Omdr.
Vehicle data
Clutch duty ratio: 5.48 %
Input DR: 0.00 %
Motor Hastighed: 0 Omdr.
Motor kølevæske temperatur føler: 0.00 °C
Gear transmission ratio: 0.00
Target gear ratio: 0.00
Brake switch: Brake not stepped on
Torque requested by driver: 0.00 %
Gearskifteposition: Ikke defineret
Input target pressure: 0.00 bar
Output target pressure: 0.00 bar
Input safety factor: 0.00
Output safety factor: 0.00
Oil temperature sensor: 0.00 °C
Mean effective_NM: 196.00 N·m
Gearbox input pressure: 0.00 bar
A/T input speed: 0.00 Omdr.
Output DR: 0.00 %
Torque converter clutch duty ratio: 0.00 %
Køretøjets hastighed sensor: 0.00 km/h
A/T turbine speed: 0 Omdr.
Pressure sensor output: 0.00 bar
A/T output speed: 0 Omdr.
Torque converter lockup state: Udløs
CAN network
Motor Hastighed: 0.0 Omdr.
Torque requested by driver: 0.0 %
Køretøjets hastighed sensor: 0.0 km/h
Motor kølevæske temperatur føler: 3.0 °C
Torque requested by driver: 0.0 N·m
Torque converter lockup state: Ulåst
Muligheder
Controls
Reset TCM learned