Car, HYUNDAI, General, TUCSON FFV (JM FFV), 2012, F 2.0 E-FFV, Body control module (BCM)

Body control module - Body control module (BCM) - 0

Identification

Vehicle name: JM

Part number: 95400-2E213

ECU name: ETACS

Manufacture date: 08/03/12

Software version number: U0

Hardware version number: C0

Algorithm ver. :: 00

DTC

B1214: Left rear outer distance sensor - malfunction

B1215: Left rear center distance sensor

Controls

Clear DTC

Data stream

Ignition 2: On

Key in switch: In

ACC: On

Ignition 1: On

Start inhibition output: On

Window lifter relay: On

Tail light switch: On

Head lamp switch: On

RPAS off Switch(Option): On

Automatic light switch: On

High beam switch: On

Rear fog light switch: On

Hazard warning lights switch: On

Left turn signal switch: On

Right turn signal switch: On

Front fog light switch: On

DRL option line: DRL

Side airbag option line: On

Tail lamp output: On

High beam output: On

Low beam groung control output: On

Head lamp output: On

Buzzer: On

Burglar horn output: On

Rear fog output: On

Hazard output: On

Left turn signal output: On

DRL europe output (Dedicated Lamp): On

Right turn signal output: On

Front fog lamp output: On

Room lamp output: On

Interior lamp autocut: On

Key slot illumination: On

Central door lock indicator: On

RPAS OFF Indicator(Option): On

Hazard warning lights telltale: On

Defogger/Deicer switch: On

Defogger output: On

Right rear seatbelt buckle switch: Buckled

Driver front seatbelt buckle switch: Buckled

Passenger front seatbelt buckle switch: Buckled

Left rear seatbelt buckle switch: Buckled

Center rear seatbelt telltale: Buckled

Right rear seatbelt telltale: On

Driver seatbelt telltale: On

Passenger seatbelt telltale: On

Left rear seatbelt telltale: On

Center rear seatbelt telltale: On

Engine hood switch: Open

Driver door switch: Open

Left rear door contact switch: Open

Passenger door switch: Open

Right rear door contact switch: Open

Trunk lid switch (Tail gate switch): Open

Driver door actuator position switch: Lock

Passenger door actuator position switch: Lock

Rear left door actuator position switch: Lock

Rear right door actuator position switch: Lock

Driver door key switch lock: On

Driver door key switch unlock: On

Central(PW) door Lock/Unlock SW: On

Passenger door key unlock switch: On

Tailgate release switch: On

Door unlock output: On

Door lock output: On

2-Turn Unlock/Dead lock output: On

Trunk/gate release output: On

Washer switch: On

Wiper intermittent switch: On

Wiper low output: On

Mist switch: On

Rear washer switch: On

Rear wiper INT. Switch: On

Rear wiper on switch: On

Rear wiper output: On

Crash signal input: Activated

Navigation wakeup signal output: On

Stop light switch: On

Inhibitor P switch: On

Parking brake switch: Park

Inhibitor R switch: On

Inhibitor N switch: On

Inhibitor D switch: On

Tail AV: On

ATM solenoid: On

Static bending light (LHD): On

Static bending light (RHD): On

Wiper INT. input volt: 5.00 V

Automatic light sensor: 5.00 V

RK RX status: -

Number of RK(+RK): 255

Auto lock doors: -

Auto unlock doors: DR door unlock

One touch triple turn signal: Enable

Head lamp escort: Enable

Auto light control: Enable

Actuators test

Controls

Door unlock output

Door lock output

2-Turn Unlock/Dead Lock Output

Tailgate/Trunk Release Output

Wiper Low Output

Rear wiper output

Start inhibit Output

Power Window Output

Tail lamp output

Head Lamp Output

Head Lamp High Output

Head Lamp Low GND Control Output

Hazard Output(+RK)

Left turn signal

Right turn signal

Front fog lamp output

Rear Fog Output

Burglar Horn Output

Defogger Output

Room lamp output

Key slot illumination

DRL Europe Output(Dedicated Lamp)

Interior lamp autocut

Central door lock indicator

RPAS Off Switch Indicator

Driver seatbelt indicator

Assist seat belt indicator(EC)

Left rear seatbelt telltale (RED)

Rear Center Seat Belt Indicator(RED)

Right rear seatbelt telltale (RED)

Navigation wakeup signal output

AV tail

ATM solenoid

Internal buzzer

Left static bending output

Right static bending output

Hazard Indicator

Configuration

Controls

Edit configuration