Car, PEUGEOT, 406, 6FZ - Sagem S2000

PSA reference: 96 49 19 10 80

ECU manufacturer: Sagem/JCAE

Additional number: 96 58 18 83 80

Diagnostic version: 09

Calibration version: FF FF

Software version: 16 02

Emission: US 83/Euro 3 Mercosur, Brazil, China, without EOBD (all models expert Partner)

ECU production date: --

Software reference: FF FF FF

P0405: Exhaust gas recirculation (EGR) valve - circuit open or short to ground

Clear DTC

Battery voltage: 12.24 V

Injection time bank 1: 0.0 ms

Deceleration fuel cut-off: No

Throttle position sensor: 0.724 V

Engine coolant temperature sensor: 13.0 °C

Ignition angle: 9.4 °

Coil 1,4 dwell time: 0.0 ms

Coil 2,3 dwell time: 0.0 ms

O2 sensor 1, bank 1: 0.449 V

O2 sensor 2, bank 1: 0.449 V

O2 sensor loop control bank 1: Open Loop

Engine speed: 0.0 rpm

Engine torque: 76.9 %

Throttle position sensor: Middle

Throttle position sensor: 0.0 °

Intake air temperature sensor: 16.0 °C

MAP sensor: 988.5 mbar

Stepper motor actual position: 100

Evaporative emission (EVAP) system, canister purge valve: Inactive

Evaporative emission (EVAP) system, canister purge valve: 0.0 %

A/C relay: No

A/C request: No

Power supply relay: Inactive

Vehicle speed sensor: 0 km/h

Cooling fan relay: Inactive

Cooling fan speed: 0.0 %

Cooling fan speed target: 0.0 %

Locking of the ECU: Unlocked

Immobilizer status: After-sales status

Problem detected when transmitting the unlock code: No problem

Injector 1

Injector 2

Injector 3

Injector 4

Fuel pump relay

Ignition coil cylinder 1+4

Ignition coil cylinder 2+3

Cooling fan high speed

Cooling fan low speed

Evaporative emission (EVAP) system, canister purge valve

Idle speed actuator

Check engine telltale

Engine coolant level warning light

ECU learn reset