PKW, MERCEDES, E 213, 213.045 E 250 Sedan, Electronic Stability Program (ESP)
Bremsanlage - Electronic Stability Program (ESP) - 0
Identifikation
Diagnoseversion: 00 0B 33
Boot software number: --
Hardware-Version: --
Softwareversion: --
Software version 1: --
Software version 2: --
Lieferant: --
Hardware-Teilenummer:
Software part number (customer):
Software part number (code): --
Software part number (data): --
Seriennummer: 00 00 00 00 00 00 00 00 00 00 00 00
FIN:
VIN stored:
Fehlercode
P010000: Mass or volume air flow (MAF) sensor 1/A - electrical fault
Controls
Fehlercode löschen
Ist-Werte
Calibration identifications: --
Number of SAR write cycles: 0.0
Raddrehzahlsensor vorn links: 0.0 km/h
Raddrehzahlsensor vorne rechts: 0.0 km/h
Raddrehzahlsensor hinten links: 0.0 km/h
Raddrehzahlsensor hinten rechts: 0.0 km/h
Längsbeschleunigung: 0.0 m/s²
Querbeschleunigung: 0.0 m/s²
Turn rate: 0.0 °/sec
Geber für Lenkwinkel: 0.0 °
Druck Hauptbremszylinder: 0.0 Bar
P1: 0.0 Bar
Voltage supply of regulator valves: 0.00 V
High pressure and return pump power supply: 0.00 V
Spannungsversorgung für Steuergerät: 0.00 V
Brake vacuum sensor: 0.0 mbar
Zündung-Zähler: 0.0
ESP off: Nein
Signal 'HIGH' of brake light switch: AUS
Signal 'LOW' of brake light switch: AUS
Left front ABS inlet valve: AUS
Left front ABS outlet valve: AUS
Right front ABS inlet valve: AUS
Right front ABS outlet valve: AUS
Left rear ABS inlet valve: AUS
Left rear ABS outlet valve: AUS
Right rear ABS inlet valve: AUS
Right rear ABS outlet valve: AUS
USV1: AUS
USV2: AUS
ASV1: AUS
ASV2: AUS
Wählhebel-Stellung: Reserviert
Parking position: N
Sollgang: N
ESP off request of IC: ESP on
ESP OFF switch: Not actuated
Gaspedalposition: 0.0 %
Motordrehzahl: 0.0 UpM
Geber für Lenkwinkel: -8192.0 °
Geber für Gaspedalstellung: 0.0 %
Kilometer reading at warning no. 1: 0.0 km
Kilometer reading at warning no. 2: 0.0 km
Kilometer reading at warning no. 3: 0.0 km
Kilometer reading at warning no. 1: 0.0 km
Kilometer reading at warning no. 2: 0.0 km
Kilometer reading at warning no. 3: 0.0 km
EVP semiconductor relay: AUS
EVP mechanical relay: AUS
MODUS: Nicht aktiv
Switch status:
Electric parking brake left motor: 0.00 V
Electric parking brake right motor: 0.00 V
Power consumption of left electric parking brake actuator motor: 0.0 A
Power consumption of right electric parking brake actuator motor: 0.0 A
Shutdown current of left electric parking brake actuator motor: 0.0 A
Shutdown current of right electric parking brake actuator motor: 0.0 A
Electric parking brake left motor: Brake applied
Electric parking brake right motor: Brake applied
Electric parking brake temperature left: 0.0 °C
Electric parking brake temperature right: 0.0 °C
Electric parking brake maximum disc temperature: 0.0 °C
Electric parking brake maximum disc temperature mileage: 0.0 km
Left front ABS inlet valve: 0.0 mA
Right front ABS inlet valve: 0.0 mA
Left rear ABS inlet valve: 0.0 mA
Right rear ABS inlet valve: 0.0 mA
Left front ABS outlet valve: 0.0 mA
Right front ABS outlet valve: 0.0 mA
Left rear ABS outlet valve: 0.0 mA
Right rear ABS outlet valve: 0.0 mA
USV1: 0.0 mA
USV2: 0.0 mA
ASV1: 0.0 mA
ASV2: 0.0 mA
Left brake: Geschlossen
Right brake: Geschlossen
Stellgliedtest
Controls
High pressure and return pump
Left rear pressure regulating valve (pressure release)
Elektrische Feststellbremse
Electric parking brake left motor
Electric parking brake right motor
Move actuator to assembly position
Dienstprogramme
Controls
Kalibierung der Gierrate und seitlich-/längsverlaufenden Beschleunigungssensoren
ESP control valves calibration
Electric parking brake calibration
Resetting value of clutch grip point
Activation of function 'Permanent fault memory'
Konfiguration
Controls
Konfiguration ändern
Konfiguration
Controls
Konfiguration ändern
Konfiguration
Controls
Konfiguration ändern
Konfiguration
Controls
Konfiguration ändern
Konfiguration
Controls
Konfiguration ändern