Car, HONDA, CR-Z, Hydraulic brake booster (HYDRBST)
Brake system - Hydraulic brake booster (HYDRBST) - 0
Identification
Identifier: 0600001500
DTC
47: Relation of PMC sensor and PREG sensor malfunction
46: Relation of brake pedal stroke sensor and PREG sensor malfunction
45: Relation of brake pedal stroke sensor and PMC sensor malfunction
44: Partial of brake pedal stroke sensor malfunction
43: Master cylinder malfunction
42: Regulator malfunction
41: Accumulator pressure low
Controls
Clear DTC
Data stream
Right rear wheel speed sensor: Ok
Left rear wheel speed sensor: Ok
Right front wheel speed sensor: Ok
Left front wheel speed sensor: Ok
Communication with METER: Error
Communication with CVT: Ok
Communication with engine module: Ok
Communication with ABS/VSA: Ok
IMA/ENG unit information: Ok
ABS/VSA unit information: Ok
Offset data for calibrating brake pedal stroke sensor (effective stroke): 0.14 V
Offset data for calibrating brake pedal stroke sensor: 0.12 V
Offset data for calibrating master cylinder pressure sensor: 0.20 V
Offset data for calibrating servo regulator pressure sensor: 0.02 V
Servo regulator pressure sensor: 5.2 MPa
Regulator valve out-port pressure sensor output: 0.33 V
Brake pedal stroke value: 4.2 mm
Brake pedal stroke sensor: 1.04 V
Master cylinder pressure: 8.0 MPa
Master cylinder pressure sensor: 1.39 V
Accumulator pressure sensor: 12.0 MPa
Accumulator pressure sensor: 1.97 V
CVT shift position: P
Idle stop switch: Off
Buzzer output status: Off
Brake warning telltale: Off
Status of warning lamp: Off
Parking brake switch: On
Brake fluid level switch: Normal
Brake pedal switch: Off
IG2 voltage: 12.8 V
IG1 voltage: 12.9 V
Supply voltage for sensor: 4.90 V
Pump motor power supply: 11.8 V
Backup voltage: 11.4 V
ECU power supply: 12.6 V
Right rear wheel speed sensor: 0 km/h
Left rear wheel speed sensor: 0 km/h
Right front wheel speed sensor: 0 km/h
Left front wheel speed sensor: 0 km/h
Engine speed: 0 rpm