Car, CITROEN, C-ELYSEE, ESP MK 100

Brake system - ESP MK 100 - 0

Identification

PSA reference: 96 63 71 15 80

ECU manufacturer: Teves

Additional number: 10 11 12 13 14

Diagnostic version: 01

Calibration version: 01 02

Software version: ED EF

Emission: If EURO4

ECU production date: --

Software reference: 98 CE C6

DTC

U1108: Absence of communication with the engine management ECU not characterised

Controls

Clear DTC

Data stream

System voltage: 12.10 V

Brake lamp switch: Released

Brake fluid level: Sufficient

ABS/ESP: Normal operation

Recirculation pump: Activated

Brake fluid level: 7.00 V

Left rear wheel speed sensor: Sufficient

Brake fluid pressure sensor: 0 bar

Engine speed: 0.0 rpm

Torque required by driver: -22.0 N·m

Gear engaged: 1

ABS deactivation switch: Deactivation of ABS/ESP not required

Handbrake status: Disengaged

Actual torque: 0.0 N·m

Accelerator pedal position sensor: 0 %

Changing gear:

Steering wheel angle sensor: Operated

Steering wheel angle sensor calibrated: Calibrated

Adjustment of steering wheel angle sensor: Adjustment

Torque converter:

Clutch status:

Gear request: 1

Movement of the vehicle in progress: Vehicle is moving

Recording of the steering wheel angle sensor information: Value measured by the steering wheel controls

Lateral acceleration without correction: 11.5 m/s²

Longitudinal acceleration without correction: -0.4 m/s²

Yaw rate sensor without correction: -90.0 °/sec

Lateral acceleration tolerance: -9.7 m/s²

Longitudinal acceleration tolerance: -9.9 m/s²

Yaw rate sensor tolerance: -6.0 °/sec

Dynamic information

Left rear wheel speed sensor: 0.0 km/h

Right rear wheel speed sensor: 0.0 km/h

Left front wheel speed sensor: 0.0 km/h

Right front wheel speed sensor: 0.0 km/h

Vehicle speed sensor: 0 km/h

System voltage: 12.10 V

Yaw rate sensor: 0.0 °/sec

Brake fluid pressure sensor: 0 bar

Lateral acceleration sensor: 0.0 m/s²

Engine speed: 0.0 rpm

Engine clearance: Active

Lateral acceleration: 0.2 m/s²

Network communication diagnostics: Inactive

Actuators test

Controls

ABS pump motor

FL Valve (In)

FL Valve (Out)

FR Valve (In)

FR Valve (Out)

RL Valve (In)

RL Valve (Out)

RR Valve (In)

RR Valve (Out)

Limiting valve 1

Limiting valve 2

Switching valve 1

Switching valve 2

Utility

Controls

Gyrometer/accelerometer sensor calibration

Replacement ESP ECU